Model Parameter Rated load Q(kg) 2500/3000 Load Center mm 500 Weight kg 73/76 Wheel size, front wheel mm 180*50 Wheel size rear wheel mm 80*70/74*70  Lifting height mm 200/190 Minimum/maximum height of operating handle in driving position mm 1234/1224 Lowered height mm 85/75 Overall length mm 1570 Fork size mm 54/160/1200 Fork outer width mm 550/685 Aisle width, tray 1000x1200mm 1733/1803 800x1200mm（1200 fork placement） 1733/1803 Turning Radius mm 1249/1319 ...

Product Introduction The claw jack is used for the load is low from the ground and the general jack can not work, so the claw part is used to prop up the load. Claw jack is a light and small lifting equipment that uses a rigid jacking piece as a working device and lifts heavy objects in a small stroke through the top bracket or the bottom bracket. This jack is used when the general jack cannot match the height of the lifting weight, the rocker can be rotated 270, and the oil will automaticall...

Product Introduction The large load range of the flat lifting belt is: 0-30 tons, and the length range is: 1-100 meters. The flat lifting belt is made of 100%PES by stitching. And both ends of the lifting belt can be enhanced with reinforced eye rings or metal fittings. EB type flat lifting belt unique advantages: 1, can be divided into single-layer or multi-layer two, and a variety of stitching methods. 2, the size can be determined according to customer requirements. 3, the bearing surface ...

Product Introduction Circular lifting belt, large load up to 300 tons, effective length up to 80 meters, the safety factor is 7: 1.6:1, circular lifting belt is made of high-strength poly new industrial filament (100%0PES), the internal bearing core is surrounded by a non-polar to form a cycle, the external use of 100%6PES composed of no stress sleeve to protect the bearing core. Circular lifting belt advantages: 1. Especially suitable for the lifting of circular objects. 2. The outer surface...

Product Introduction Automatic suction cup is mainly used in shipyards, forming parts factories, warehouses, workshops, freight yards and other lifting equipment supporting the use of medium suction plate ferromagnetic materials or workpieces, can be applied to suction steel plate, ingot, shaped steel can also be used for suction scrap and scrap iron, can be used in a single set, but also multiple sets of combination suction large and long ferromagnetic materials of the workpiece, The automat...

Product Introduction Magnetic hoist also known as (permanent magnet hoist) Permanent magnet hoist is mainly used in the lifting operation process, for moving iron plates, block and cylindrical magnetic conductive materials of the workpiece. The permanent magnet jack is made of high performance magnet material and scientific magnetic circuit principle. Large suction, small size, light weight, safe and convenient operation. It is an ideal spadder to save energy, abandoning the complicated match...